86-21-39126868
Building 9, No. 1755, Wenbei Road, Jiading District, Shanghai, China (Mainland)
LS810 aviation obstruction light for telecom tower warning light
LS810 Obstruction light for a wide variety of cranes used in Harbors, metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.
Main fuctions and features:
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• based on LED technology, low power consumption, and high effecience.
• Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion resistance and durability
• Extremely Reliable – Major Maintenance Cost Saving
• G3/4”pipe is available, ease of mount
• EMC Compliance, No RF Radiation
• Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount
• Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability, high transmittance
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional)
• Steady burning or flashing type (no need external controller)
Specification
Standard | Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810 | Vertical degree | ≥10 |
Light source | LED | Horizontal degree | 360 |
LED color | Aviation red | Flashing rate | Steady burning or flashing(flashing rate can be selected) |
Operating voltage | AC110V~AC240V(Option:DC48V) | LED life | ≥100,000h |
Power consumption | 3W | On/off level | 500Lux |
Intensity | ≥32.5cd |
|
|
| |||
Operating temperature | -30C ~ +70C | IP Protection | IP65 |
Relative humidity | 10% ~ 95% (no condensing) | Weight | 350g |
Material | base:Die casting aluminum, housing: PC | ||
Installation and operation
• Check whether the supply voltage does comply with the rated voltage of the lamp (Pay attention to the polarity in case of DC voltage).
• Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively
• Tighten the screws between lamp housing and base
• Screw the lamp on the G3/4” ( G1”) threaded pipe, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ028 and PJ030 (installing diagram), special bracket can be customized.
• Verify whether the power cables are well connected before power on.
Model: LS810 red color aircraft warning light for chimney aviation warning light
Applications: Applied to iron towers(electicity,telecom, microwave, etc), chimneys(heat-engine plant, coking plant,chemical plant), high buildings, large-scale bridge.large-scale port machinery,large engineer machinery and wind turbines which need the warning for aircraft machines.
Standard: ICAO Type B low intensity FAA L-810 CAAC L-810
Certificate:
Utility model patent certificate
ICAO CAAC
Improve Record:None
Fault Record:None
Quantity/Delivery Day: 5pcs/5Days
Similar Products
LS710 red color aircraft warning light for chimney aviation warning light
Company Introduction
For more than 24 years, Shanghai NANHUA Electronics focus on the designing, manufacturing and marketing of industrial application
products. Specialized in the chimney aviation warning light
for international market since 2007 which have been ICAO and FAA
Certified. A complete line of cost-effective obstruction lighting and control solutions for the telecom tower, chimney, high building, port
machinery and any other high positions with dangers threaten for the aircraft, and have been proven to be professional design and
highly reliable.
NANHUA Electronics located in Shanghai, China, with a factory of 6000 square meters, 283 staffs till JAN of 2014 including 37 in R&D
center, which is ISO9001 quality authentication certified.
Our Philosophy
Nanhua believes in a simple philosophy. We focus on providing the best products and service to clients and which is the reason for Nanhua’s
existence. We believe that successful enterprise and employee fulfillment can only be realized by long-term hard working.
Nanhua pursues broad perspective and believes that imaginative work can change the world. We expect Nanhua to become an internationally
competitive firm. Through constant hard work we anticipate a prosperous future.
Nanhua dedicates herself to creating an equal, free and open working environment. We respect each employee’s uniqueness and hope that
all of them will work happily in Nanhua.
Quick contact information
Stella Su
